大学英语词汇短语释义解析及例句 bevel
释义：
bevel n. 斜角；斜面；[测]斜角规
vt. 使成斜角；使成斜面
vi. 成斜角；把切成或磨成斜边或斜角
adj. 成斜面的
n. （Bevel）人名；（英）贝弗尔
[ 复数 bevels 第三人称单数 bevels 现在分词 bevelling或beveling 过去式 bevelled或beveled 过去分词 bevelled或beveled ]
例句：
Having the slant of a bevel.
具有斜面的倾斜特点。
Sand the wood until it has a nice bevel.
用砂纸打磨这块木头，磨出一个光滑的斜面。
Add Bevel and Emboss and Gradient Overlay.
添加斜面和浮雕和渐变叠加。
It used bevel gears to transmit power to the prop.
它使用的锥齿轮转交权力交给道具。
The bevel is cleaned and the dimensions are correct.
坡口清理完成，尺寸正确。
Bevel and Emboss layer styles add 3d effect on our shape.
倾斜和浮雕花纹层风格添加3d影响我们的形状。
Beveled-entry driveway. Bevel dimensions can be specified.
入口倾斜的车道可指定倾斜的尺寸。
The damaged bevel and pipe ends are identified and repaired.
损坏的管端及坡口已被发现并修复。
It also give a single facet on the bevel so it's easy to repeat.
它还提供了关于斜所以很容易重复一个方面。
After that, select Bevel and Emboss and just follow the image below.
在此之后，选择斜面和浮雕，只是按照以下的形象。
Bevel gears can be mounted at standard, 90, 180 or 270 degree mounting.
锥齿轮可以采用标准位置，90度、180度或270度位置安装。
Again, draw smaller circle shape. Add Bevel and Emboss and Gradient Overlay.
同样，画小圆圈形状。添加斜面和浮雕和渐变叠加。
The bevel milling cutter for cutting groove of oil casing - pipes was designed.
设计了用于油气田管道坡口切割的角度铣刀。
Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.
即在大锥齿轮的齿面上涂一层薄而均匀的红铅油，然后转动齿轮数圈。
You will also learn about the use of the Taper object, Fillet option and Bevel function.
您还将了解锥度对象、圆角选项和斜角功能的使用。
Draw a rounded rectangle on the opposite side. Add Inner Glow and Bevel and Emboss.
上绘制一个圆角矩形对面。添加内发光和斜面和浮雕。
When ordering bevel gear actuators, specify mounting position as second line information.
如果是订购锥齿轮执行器，请在第二行增加安装位置信息。
These drive the central propeller shaft through bevel reduction gears with a 2:1 reduction.
这些驱动器，中央螺旋桨轴通过减少锥齿轮2：1减少。
Top view of bevel headed, hexagonal head set screw. Selection box represents thread diameter.
斜切六角螺钉的俯视图。选择框代表螺纹直径。
Effects, such as shadow, glow, soft edges, and bevel, can also be accessed from the Format TAB.
效果选项包括：阴影、发光、羽化、倾斜，也可以直接使用格式选项卡。
All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.
所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。
Going into the gearbox, universal joints connect the centre drive shaft to the internal bevel gears.
进入变速箱，万向节连接中心传动轴到内部锥齿轮。
