大学英语词汇短语释义解析及例句 glass bead
释义：
glass bead 玻璃珠
例句：
She accidentally swallowed a glass bead.
她不小心吞下了一颗玻璃珠。
Glass bead gels need not be hydrated prior to use.
玻璃珠凝胶在使用之前不需要水化。
She has a beautiful glass bead and a bracelet in the box.
盒子里有一颗美丽的玻璃珠和手镯。
This hand blown glass bead has Blue and white swirled flowers.
这手吹玻璃珠有蓝色和白色的花朵众说纷纭。
Glass bead filled with PP and PE are pseudoplastic fluid system.
玻珠填充pp、PE体系符合非牛顿流体流变行为的指数定律。
The filling content of hollow glass bead generally is between 5% -20%.
空心玻璃微珠的填充量一般在5%-20%之间。
Glass bead blasting is acceptable. Steel shot blasting is not acceptable.
可以喷玻璃砂，不可喷钢丸。
The round rate of this kind of glass bead are as high as 90% with very low impurity.
此类玻璃珠的成圆率高达90%以上，杂质含量极低。
This sheeting has excellent entrance angularity, which is typical of encapsulated lens glass bead sheeting.
具有更优秀的入射角，这也正是玻璃微珠的优势所在。
Design structure: the product consists of the chassis, paint hopper, glass bead hopper, and gas fueled system.
结构特点：该产品有底盘、涂料斗、玻璃珠斗、燃气系统组成。
The results showed that the compatibility of hollow glass bead and resin was improved by adding silane coupling agent.
结果表明，硅烷偶联剂改善了空心玻璃微珠与树脂基体的相容性。
The influence of small grain size glass bead (GB) on the properties of linear low-density polyethylene ( LLDPE) was studied.
研究小粒径玻璃微珠的粒径和用量对线形低密度聚乙烯（LLDPE）性能的影响。
The cell structure, compression and damping properties of rigid polyurethane foam filled with hollow glass bead were studied.
研究了加入空心玻璃微珠后，硬质聚氨酯泡沫塑料的泡孔结构、压缩性能以及阻尼性能。
The dynamic mechanical properties of glass bead filled LDPE composites were Iivestigated by using of a dynamic mechanical analyzer.
应用动态力学分析仪，考察了低频条件下玻璃微珠填充LDPE复合材料的动态力学性能。
It introduces some problems that require attention during the design of different glass bead profile, and relative solving methods are carried out.
本文着重介绍了不同的压条在设计中应该注意的各种不同问题及解决方法。
Glass bead profile, one of plastic special-shaped products with small cross-section, ACTS an important role in the process of integrated assembling.
压条是塑料异型材中截面很小的一个零件，但在整体装配中起着举足轻重的角色。
The properties of rigid particle filled polymers, glass bead-filled polypropylene with different interfacial designs are studied through experiments.
本文针对玻璃微珠填充聚丙烯这一刚性粒子填充聚合物复合体系进行了实验研究。
The performances of different impact media were compared. The results show that the glass bead is the best choice of impact media for mechanical plating.
对比了不同种类冲击介质的物化特性，指出玻璃珠是机械镀锌冲击介质的最佳选择。
The stirring, the glass bead breaker, the high pressure cell cracker and the high pressure cracker to break cell for releasing ALDH were investigated and compared.
本文着重考察了搅拌粗提、珠磨破碎、高压细胞破碎仪和高压破碎仪的细胞破碎方法对释放ALDH的影响。
