大学英语词汇短语释义解析及例句 manual arc welding
释义：
manual arc welding 手工电弧焊
例句：
With manual arc welding function.
具有手弧焊接功能。
The manual arc welding normally refers to the manual welding using coated electrode.
手工电弧焊通常是指采用药皮焊条的手工焊接法。
Equipments for manual arc welding consist of power source, current regulator, electrode holder and cables.
手工电弧焊的设备包括焊接电源、电流调节器、焊钳及电缆线。
Therefore, it always has good welding properties when carrying out manual arc welding at different position.
因此在各种不同位置进行手工弧焊时，均有良好的焊接性能。
The arc voltage is not easily controlled in manual arc welding, sometimes it is damaged to the quality of welding.
手工电弧焊的电弧电压是一个难以控制的参数，有时能对焊接质量产生较大影响。
The paper introduces the high toughnesses Ultra-low hydrogen electrode (new J807CF) which matches WCF—80 steel for manual arc welding.
本文介绍了高强高韧性超低氢新J807CF焊条，其各项性能均达到国外同类产品的先进水平，是WCF—80钢的专用配套焊条。
Welding, as far as possible using argon arc welding, manual arc welding should be used in small current, fast welding, to avoid the swing.
焊接时尽量采用氩弧焊接，采用手工电弧焊时应采用小电流、快速焊，避免摆动。
I am, electric welders engaged in manual arc welding and carbon dioxide welding work, through these years of electric welding work my technology …
我是电焊工，从事手工电弧焊和二氧化碳气体保护焊工作，通过…
Safety characteristics of manual arc welding and the accident due to it were described. Its cause was analyzed. Its safety prevention measures were put forwards.
通过分析手工电弧焊的安全特点和对引发事故的原因进行分析，提出针对防止手工电弧焊引发事故的安全防范措施。
By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
根据对比铝热焊与手弧焊修复工艺，阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
The national standard is suitable for welded joint of carbon steel and low alloy steel with gas welding (being used for sheet metal), manual arc welding and gas - shielded welding.
本标准适用于气焊(用于薄板)，手工电弧焊及气体保护焊焊接的碳钢、低合金钢焊接接头。
The physical and chemical properties of welding arc affecting the amount and toxicity of fumes generated during manual arc welding with low carbon steel basic electrodes are investigated.
本文研究了影响碳钢碱性焊条焊接烟尘量及其毒性的电弧物理及化学因素。
The experimental results show that the power source meets the requirements presented by the pulse TIG welding. DC TIG welding and manual arc welding, and is a new many functions power source.
研究结果表明，所研制的焊机可以满足脉冲tig焊、直流tig焊、手工电弧焊三种方法的焊接要求，是一种新型多功能焊机。
By using manual arc welding to repair the big kiln circle, the welding process of ZG310-570 super thick cast steel piece was a success, with good running effect observed for more than 5 years.
通过对大窑轮圈采用手工电弧焊的方法进行修复，成功地解决了ZG310- 570铸钢特大厚件的焊接工艺，经过5年多的运行观察，使用效果良好。
The joint microstructure and mechanical properties of high strength bainitic steel plate were studied by CO2 gas shielded welding(CGSW), submerged arc welding(SAW) and manual arc welding(MAW).
利用二氧化碳保护焊、埋弧焊、手工电弧焊研究了高强度贝氏体钢板焊接接头的组织和力学性能。
