China – Film blowing machine has a little bit complicated structure. Therefore, the operator should be very carefully during the normally operation. Today, the famous film blowing machine supplier Sincerity plastic machinery co., limited will tell operator which factors they need to note when they operate this machine.
When the machine is on the operating situation, the operator cannot stand in front of it. This could help to avoid the accidental injury to the operator. Operators should pay more attention to prevent feed the hard objects such as metal impurities and operating gadgets into the machine barrel. When people handle the rotating machine, the wearing for gloves should be prohibited as it will cause into related damage.
Second, before the operation, the operator should do good inspection to the lubricated condition of each part of the machine. Please be sure to add enough lubricant oil into the gear box and air compressor. On the other hand, operator should check the lubrication of mechanical transmission components, avoiding damage from drying operation. This is the main reason why the film blowing machine has such short service life.
Thirdly, before the operation for plastic film blowing machine , people must check whether there are leakage and disconnected situation for the power supply wiring. Then, please check whether the instrument is normal or not. Operator should ensure that all components of the machine are safety and in normal so as not to affect the production process or cause into unimaginable accident.
Fourthly, when people find that the discharging outlet has uniform material, they could wear gloves and then slowly pulling the tube while close the tube end and open the gas control valve. This process will let the operation process of the machine become so fluently.
Five, the pressure of compressed air which used for blowing the tube should be appropriate which could be not to make the tube rupture but also ensure the stability of asymmetric membrane tube. If operator could carefully check this factor, the quality of these finished products could be better ensured.
Sixthly, we all know that the daily cleaning is very necessary part of the work for film blown operator. When it is in the cleaning process for the outlet, people could use copper knives, sticks or compressed air to clean it up. At the same time, please avoid damage to the smooth surface of the screw otherwise it will affect the final quality of the finished films.
About Sincerity plastic machinery co., limited www.sincerity-machinery.cn
Sincerity plastic machinery co., limited is a professional manufacture for plastic PE/PVC/PP film blowing machine, bag making machine, plastic recycling machine, roll slitter machine, WPC extrusion machine, pipe extrusion machine etc making .
Contact:
Sincerity plastic machinery co., limited
Mobile: 86 15168707960
Email: lixing12@gmail.com
Twitter: nicoleleechina
Website: http://www.sincerity-machinery.cn
