大学英语词汇短语释义解析及例句 branch pipe
释义：
branch pipe 支管；分歧管
例句：
Developed excogitates of two decumbence and one horizontal molding die realized the increasing height of branch pipe of heat pressure tee.
研发出了两个横梁和一个水平成型模具，实现了热压三通支管高度的增加。
Tee is used at a branch pipe fittings.
三通是用于管道分支处的一种管件。
A steel branch pipe is a common constitution in pipeline engineering.
钢岔管是管道工程中常见的结构。
The main pipe, the branch pipe, and the breathing pipe all are hoses.
主管、支管和通气管均为软管。
When the discharge is higher than a certain value in a branch pipe, on self - excited vibration will produce.
在分支管路中，当分支管中的流量大于某一值时，自激振动就不会产生。
Welding seam should be numbered according to pipeline medium set, in principle, main pipe prior to branch pipe.
焊缝编号应根据管线介质流向进行编号，原则上应先主管后支管。
The air inlet of the inflator can be tightly plugged in the valve inside the branch pipe port to open the valve.
充气器的进气口可插紧在支管口内的阀门中，开启阀门。
The problem of flow uniform distribution with larger flux in multi-branch pipe is complicated but inevitable in projects.
这种较大流量气流的多支管流量均匀分配问题是较复杂的，但也是工程应用中不可避免的。
The mid portion of the plastic branch pipe is fixedly arranged at the lower portion of a base through a connecting piece.
连接件的下端挂接饵簧，中部穿过基座的芯孔，上端穿出在基座上插接的塑料管后接挂绳；
Many heating process with smoking gas involves the uniformity problem of flow distribution with larger flux in multi-branch pipe.
许多烟气加热过程涉及到较大流量多支管流量分配均匀性问题。
Duct branch is rich in natural form of uniform distribution, wall smooth, branch pipe and tube diameter on the transition to a flat.
导管分支丰富，形态自然，分布均匀，管壁光滑，分支导管与上一级导管管径过渡平缓。
A branching device connects a branch pipe to a main pipe through an orifice in the main pipe utilizing a saddle-like sealing member.
分支装置使用管托状的密封件通过主管上的管口将支管连接到主管上。
The diameter (opening position , outer painting) of this branch pipe is not correct. It must be fabricated in accordance with the drawing.
这一支管通径（开的位置，外部涂装）不对，一定要按照图纸施工。
Based on the limit analysis viewpoint, a formula that could be used to estimate the in plane limit moment of welded branch pipe Tee was derived in this paper.
基于极限分析的观点，推导了工业中焊制管道三通在面内弯矩工况下的极限载荷估算式。
The steam pipe and correlative branch pipe of power plant are detected to appear thermal diffuse crack, which influence the normal run of the generator severely.
发电站蒸汽管道的支管连接部位以及与之相连接的支管接管座处出现的热疲劳裂纹，严重影响了发电机组的安全运行。
The tee joint entity model has been chosen by the study of the influence of diameter of the branch pipe and the length dimension of the run pipe and branch pipe.
研究了不同支管管径、不同管长尺寸的影响，选择了三通实体模型；
Based on the limit analysis viewpoint, a formula that could be used to estimate the out-of-plane limit moment of welded branch pipe tee was derived in this paper.
基于极限分析的观点，推导出面外弯矩作用下焊制三通的极限载荷估算公式。
Both ends of the three-tiered water collecting branch pipe respectively communicate with the corresponding three-tiered horizontal water collecting pipe on both sides.
三层集水支管的两端分别与两侧相应的三层水平集水管相连通。
The results established foundation for the application of flow uniform distribution in multi-branch pipe and gave reference for all kinds of problem of flow distribution.
文中所得结果为较大流量气流的多支管流量均匀分配技术的应用奠定了基础，对各类流量分配问题具有重要的参考价值。
The waste liquid eductor of the flow cytometry comprises a waste liquid discharge pipe, a first branch pipe, a second branch pipe and a pressure fluctuation isolated unit;
该流式细胞仪的废液排放装置包括废液排放管、第一支管、第二支管和压力波动隔离单 元；
Building of hydraulic tunnels with high head and large diameter increase gradually, and the underground reinforced concrete branch pipe is adopted in more and more projects.
相应的高水头大直径水工压力隧洞的建设也逐渐增多。并且越来越多的工程采用地下钢筋混凝土岔管。
