大学英语词汇短语释义解析及例句 bond strength
释义：
bond strength 粘合强度；[物化] 键强度
例句：
Mg alloy; electroless plating; bond strength.
镁合金；化学镀；结合强度。
Bond strength of love, enough to smash all fetters.
爱情纽带的力量，足以粉碎一切羁绊。
Cement bond strength high, with very few and using the lunch.
水泥的粘结强度高、用费少且运用便当。
And this turns out to have a bond strength of 435 kilojoules per mole.
这证明有每摩尔435焦的，的共价能。
The bond strength between corroded deformed bars and concrete is studied.
对锈蚀变形钢筋与混凝土之间的粘结力进行了研究。
Xeno III Adhesive provides bond strength comparable to total etch systems.
异种三胶粘剂粘结强度可比提供总额蚀刻系统。
The bond strength adhesive tape for repeatability of test results is critical.
胶带的粘合强度对于测试结果的可重复性非常关键。
Moreover, 27 small cube concretes are investigated to the bond strength per area.
此外，还进行了单位粘结面积上粘结强度的试验，共27个小试件。
The shear bond strength decreased while the concentration of NaF was higher than 3%.
当氟化钠浓度高于3%后，托槽的抗剪粘接强度下降。
Influence of Storage Methods on Microtensile Bond Strength of Dentin Adhesive System.
离体牙储存方式对牙本质粘结系统微拉伸强度的影响。
The bond strength between bone and titanium coatings was also measured by push-out test.
涂层与骨组织之间的结合强度用推出实验进行测量。
The bond strength of polymer(PAE) cement mortar with double booked steel fiber is the highest.
聚合物水泥砂浆与双肢钢纤维的粘结强度最大。
With same material and technics, bond strength of parallel lay-up is higher than upright lay-up.
材料和工艺相同时，顺纹组坯时的胶合强度高于垂直纹理组坯时的胶合强度。
Objective To compare the shear bond strength of light cured and chemically cured resin adhesive.
目的对光固化和化学固化树脂粘接剂的剪切强度进行对比研究。
Results show the pretreatment of basal body of magnesium alloy is important to the bond strength.
结果表明，镁合金基体的镀前处理对镀层的结合强度至关重要。
The resin fast permeability, infiltration of good products can improve bond strength between layers.
该树脂渗透性快，浸润性好，可提高制品层间粘结力。
The bond strength between AFRP belts and concrete was higher than that between steel bars and concrete.
而纤维带与混凝土之间的粘结性能要强于普通钢筋。
Insulating ability and peel bond strength are two important properties for thermal insulating covering.
保温性能和剥离强力是保温被两个非常重要的性能指标。
In addition, the ultimate bond strength decreases with the increase of anchorage length and bar diameter.
此外，极限粘结强度也随着锚固长度、钢筋直径的增大而减小。
Both of these applications require adequate bond strength of composite resin to the surface of porcelain.
通常各类全瓷修复体应用粘结性树脂粘固于牙体表面。
This energy level diagram helps us understand the relationship between electron filling and bond strength.
能级图能帮助我们，理解电子填充，和键强的关系。
Conclusion Self-curing hydrogel lining material has a very high bond strength, but partly affected by water.
结论自凝水凝胶软衬材料具有很高的粘结强度，但水对其有一定影响。
