大学英语词汇短语释义解析及例句 rocker arm
释义：
rocker arm 摇臂，[机] 摇杆
例句：
The mute rocker arm, less noise.
静音摇臂支撑结构，噪声更低。
The finished rocker arm brackets.
成品摇臂括号。
We can offer rocker arm used for tractor.
我们能提供摇臂用于拖拉机。
Install the hydraulic tappets and rocker arm.
安装液压挺杆和摇臂。
Some castings, such as crankshaft, rocker arm et al were produced.
已浇注了曲轴、摇臂等铸件。
One of the heads with rocker arm brackets and spark plugs installed.
其中一名负责人与摇臂括号和火花塞安装。
D. Draw lines on the door frame according to the auxiliary rocker arm.
按闭门器的副摇臂在门框上画线。
The push rod, as it is lifted, causes the end of the rocker arm to move up.
当推杆升起时，摇臂的端部向上移动。
The CAM follower rides against a push rod, which pushes against a rocker arm.
凸轮挺杆推动控制摇臂的推杆。
Photo 1 shows the rocker arms with the rocker arm pins and ball bearings installed.
图片1显示了摇杆武器与摇臂引脚和球轴承安装。
The downward-moving side of the rocker arm pushes on the valve stem to open the valve.
摇臂向下移动的那一边推动气门杆以打开气门。
Rocker arm, Rocker arm shaft, Rocker assembly, Valve guide tube, Camshaft bearing Cap.
气门摇臂，摇臂轴，摇臂总成，气门导管，凸轮轴盖。
The rocker arm on the jacket launch barge is a transition installation equipped at the stern.
导管架下水驳船摇臂是安装在船艉的用于导管架滑移下水的过渡装置。
Common defects during the rocker arm production were analyzed and some measurement was suggested.
同时，分析了摇臂铸件在生产过程中常见的缺陷，并提出了改进措施。
This setup shows the radius on the end of the rocker arm brackets being cut using the rotary table.
这表明，半径设置的结束摇臂括号被削减使用转盘。
In this thesis, the equations have been set up through treating bearings of rocker arm as elastic component.
本文将转臂轴承视为弹性环节建立并提出适合于这类传动的变形协调普遍方程。
Average type beam drill is composed of base, inside and outside column, rocker arm, main spindle box and job.
普通型摇臂钻床由底座、内外立柱、摇臂、主轴箱及工作组成。
The rocker arm pivots around its supporting shaft so that the valve end of the rocker arm is forced downward.
摇臂围绕支承轴旋转，气门与摇臂相对应的一端压下。
Inside the pump, a flexible diaphragm connects to the rocker arm though a diaphragm spring, pull rod and link.
油泵中可变形膜片的泵膜通过膜片回位弹簧和膜片拉杆与摇臂相连。
The utility model solves the problem that the traditional rocker arm type water conveying pipe can not be bent.
解决了传统的摇臂式输水管不能弯曲的问题。
By the bucket wheel loader working device, connecting rod, rocker arm, turn fights, cylinder and lifting cylinder.
摘要轮式装载机工作装置由铲斗、连杆、摇臂、动臂、转斗油缸和举升油缸组成。
