大学英语词汇短语释义解析及例句 metal arc welding
释义：
metal arc welding [机] 金属电弧焊；金属弧焊接
例句：
Gas metal arc welding (GMAW) is the main welding method in welding production.
熔化极气体保护焊(GMAW)是焊接生产中常用的焊接方法之一。
Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.
焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。
Shielded Metal Arc Welding, Submerged-arc Welding and CO2 Arc Welding are recommended for base layer welding.
基层的焊接，推荐采用手工电弧焊、埋弧焊以及二氧化碳气体保护焊。
This study established a comprehensive approach to monitor erythemal UVR magnitude from Shield Metal Arc Welding processing.
本研究建立一完整的评估方法，监测由遮蔽金属电弧焊接产生的红斑紫外线强度。
The behaviors of desulphidation during manual metal arc welding have been studied by means of experimental and theoretical analysis.
通过试验和理论分析，研究了手弧焊熔渣冶金脱硫行为。
Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.
应用高效的气体保护熔化极电弧焊焊接铝合金薄板时，容易出现熔池下塌、烧穿等焊接缺陷。
Based on the through the arc sensing method, a method is put forward to recognize the disturbance information of gas metal arc welding (GMAW).
基于电弧传感的检测方法，提出了一种识别GMAW焊接过程干扰信息的方法。
The mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.
东方电机股份有限公司首次采用混合气体熔化极气体保护焊焊接水轮机转轮室，并且在出口叙利亚的迪什林水轮机中应用。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.
双丝共熔池气体保护焊（TCGMAW）的熔滴过渡对焊缝成形以及焊接质量具有重要的影响。
Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper.
介绍了采用不锈钢药芯焊丝CO2气体保护焊焊接不锈钢储罐的工艺过程。
Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.
采用堆焊焊条CHR322，在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。
