大学英语词汇短语释义解析及例句 plasma arc welding
释义：
plasma arc welding 等离子弧焊；等离子电弧焊接
例句：
Study on the Plasma Arc Welding Technology of Austenite Stainless Steel Parts;
研究了电场奥氏体化对低碳钢的淬火组织的影响。
Research on micro-plasma arc welding of Co-Cr alloy metal in oral cavity repair;
探讨了以手工方式进行铸造钴铬合金口腔修复材料微束等离子电弧焊的可行性。
Direct metal forming based on plasma arc welding is a novel rapid prototyping process.
基于等离子弧焊的直接金属成形方法是一种新型的快速成形工艺。
A novel variable polarity plasma arc welding (VPPAW) power supply is introduced in this paper.
介绍了所研制的具有自调整换向功能的大功率变极性等离子弧焊接电源。
The result of developing SCR power supply for pulse plasma arc welding is introduced in this paper.
本文介绍了可控硅脉冲等离子弧焊电源的研制成果。
The article discussed the feasibility of micro-plasma arc welding Co-Cr alloy for oral cavity repair.
试验研究了钴铬合金口腔修复材料微束等离子弧焊的可行性。
The plasma arc welding have a high energy density, thick welding thickness that can weld for single time.
等离子弧焊具有能量密度高，一次性可焊厚度大等优点。
Based on TPAW, finite element calculation of temperature field in keyhole plasma arc welding is conducted, and.
在此基础上，对小孔等离子弧焊接热场进行了有限元计算，分析了引弧后熔池及周围温度场的瞬时演变过程。
In variable plasma arc welding of aluminum, the behavior of variable polarity plasma arc is effected by pilot arc.
在铝合金变极性穿孔焊接的工艺中，维弧对变极性电弧的行为有着重要影响。
This work may be as a useful tool for the understanding of the parameters matching and process optimization in plasma arc welding.
本文的工作对于等离子弧焊接工艺参数的匹配及其过程的优化有重要的指导意义。
The system can not only be used in pulse plasma arc welding, but also can be used in penetration controlling in plasma arc welding.
该系统不仅可以进行脉冲等离子弧焊接，而且可以实现脉冲等离子弧焊接的熔透控制。
Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.
采用焊管作为管坯 ，焊管弯曲采用专用模具热弯 ，焊接采用等离子弧焊。超塑成形采用多层模结构 ，用模具来控制波形。
The relationship between the keyhole behavior and arc light emission flux is studied by spectroscopic method in plasma arc welding of stainless steel.
针对不锈钢穿孔等离子弧焊过程，熔池小孔的特征行为与弧光光谱辐射强度之间的关系进行了光谱试验研究。
On the basis of the characteristics of pulse plasma arc welding, a feedback control system has been developed for controlling tne penetration of welds.
本文根据脉冲等离子弧焊接的特点，研制了一种反馈控制系统，用以控制焊缝的焊透质量。
Based on just mentioned put forward a basic thought of realizing the automatic control system of keyhole plasma arc welding and designed ensemble control programme.
据此提出了实现等离子弧焊闭环质量控制的基本思想并设计了总体控制方案。
The plasma cloud charge sensor was applied to detect the status of keyhole molten pool during pulsed plasma arc welding, furthermore, the detected signals were studied.
将等离子云传感器应用于脉冲等离子弧焊穿孔熔池小孔状态检测，并对检测信号的波形特征做了深入研究。
The forces acted on melting pool during plasma arc welding process are analyzed. The violent movement of liquid metal is as the result of joint forces acted on the pool.
通过对等离子弧焊接时熔池的受力情况分析，阐明了液体金属剧烈运动是由于多种力共同作用的结果。
It describes the feature of pulse plasma arc welding and introduces the general design thinking and its composition of SCM control system for the pulse plasma arc welding.
简述了脉冲等离子弧焊接的特点，介绍了该脉冲等离子弧焊接的单片机控制系统总体设计思想及其组成。
The-test results show that the power supply exhibits good dynamic and static characteristics, and therefore can perfectly fulfil the requirements of pulse plasma arc welding.
试验结果表明：该电源具有良好的动特性和静特性，能很好地满足脉冲等离子弧焊的要求。
Using low cost charge coupled device (CCD), a vision sensing equipment in welding process was made, and a real time plasma arc welding (PAW) seam tracking system was implemented.
采用低成本电荷耦合器件制作了焊接过程视觉传感器，实现了一种等离子弧焊焊缝实时跟踪系统。
Plasma spray welding power source, which gives energy to plasma arc welding, involves welding technology, power electricals, control theory, computer science and technology, and so on.
等离子喷焊电源是为等离子弧提供能量的电源，涉及到焊接工艺学、电力电子学、控制理论和计算机科学与技术等众多领域。
